Model 11 with factory polychoke

Topics related to Post - 1898 Remington Shotguns
Post Reply
Doveman1985
Posts: 4
Joined: Fri May 07, 2021 8:10 pm

Model 11 with factory polychoke

Post by Doveman1985 »

How common or rare is a Remington model 11, 16 gauge with a factory installed polychoke. The barrel and gun have matching serial numbers and was made in 1947. I know it's factory installed because the barrel is machined at the end to accept the polychoke plus there's no choke engraving on the barrel. The barrel is normal diameter until it flairs out continuously to mate with the polychoke. Thanks
Researcher
Posts: 1125
Joined: Sat Mar 22, 2003 11:06 pm
Location: Washington and Alaska

Re: Model 11 with factory polychoke

Post by Researcher »

Rare may be an overstatement, but scarce for sure. The Model 11 and The Sportsman were introduced in 16-gauge in 1931. Factory integral Poly-Chokes were first offered by Remington Arms Co., Inc. in the January 19, 1940, catalog --
Integral Poly-Choke, January 19, 1940.jpg
Integral Poly-Choke, January 19, 1940.jpg (282.14 KiB) Viewed 4599 times
Doveman1985
Posts: 4
Joined: Fri May 07, 2021 8:10 pm

Re: Model 11 with factory polychoke

Post by Doveman1985 »

Thanks, I failed to mention it was a Sportsman's model so the vintage ad you posted makes sense.
MarkWC
Posts: 6
Joined: Fri Jun 27, 2025 2:46 pm

Re: Model 11 with factory polychoke

Post by MarkWC »

So, how about an 11-48 barrel with this date stamp & a Poly Choke?
I bought this barrel used for my Mohawk-48, that was made in 1973, its fit perfectly.
But, I'm uncertain about the when or how the Poly Choke came to be on this barrel, I'd like to think its a Remington Install, but above the date stamp the barrel is also stamped "FULL"
Thanks
Mark
Attachments
DSC02290.JPG
DSC02290.JPG (216.82 KiB) Viewed 24 times
DSC02288.JPG
DSC02288.JPG (219.62 KiB) Viewed 24 times
Mainspring
Posts: 124
Joined: Wed Jan 05, 2022 10:05 pm

Re: Model 11 with factory polychoke

Post by Mainspring »

The adjustable choke was added after it left the factory. The Full choke was on the original barrel.
MarkWC
Posts: 6
Joined: Fri Jun 27, 2025 2:46 pm

Re: Model 11 with factory polychoke

Post by MarkWC »

Mainspring wrote: Sun Jul 06, 2025 3:58 pm The adjustable choke was added after it left the factory. The Full choke was on the original barrel.
Thanks for the reply.
The choke itself is branded "Poly Choke" the bluing at the base is a perfect match to the barrel, so the whoever that installed the Choke did an amazing job.
The barrel was made near the transition of the M-11 & M-11/48 or to say Dec 1948, so the barrel was around during the days of Remington using the Poly Choke. I think this barrel is an amazing find for its condition, its been well stored, its shows very little signs of any use.
& that's a good thing because the gun (Mohawk-48) was given to me in near New Condition, I don't think its ever been fired (beyond factory testing) this extra barrel & able to dial it to Modified adds more versatility to the gun, & the barrel matches the condition of the gun to be 25yrs older than the gun.
Attachments
DSC02296.JPG
DSC02296.JPG (178.18 KiB) Viewed 14 times
DSC02306.JPG
DSC02306.JPG (140.66 KiB) Viewed 14 times
DSC02305.JPG
DSC02305.JPG (135.32 KiB) Viewed 14 times
DSC02304.JPG
DSC02304.JPG (113.64 KiB) Viewed 14 times
Post Reply