Model 11 Shotgun
Model 11 Shotgun
I am attempting to determine the manufacture date and any additional information such as grade/type on a Model 11. The serial number is 390722. The codes stamped on the barrel are BFX. BF would seem to indicate January of 1937 manufacture date, but I can’t find anything regarding the X. The barrel is modified and there appears to be a C stamped on the barrel adjacent to the receiver. There is a duck scene on one side and pheasant on the other. Thanks in advance for any insight anyone my provide!
-
Researcher
- Posts: 1121
- Joined: Sat Mar 22, 2003 11:06 pm
- Location: Washington and Alaska
Re: Model 11 Shotgun
The receiver with serial number 390722 was put in work during 1936. That is right in the time frame when Remington started putting the roll-stamped birds on the sides of the Model 11A, B & C receivers, though they still pictured the plain receiver in the 1936 & 7 catalogs --
and first showed the roll-stamped bird in the January 3, 1938, catalog --
- March 6, 1936, Model 11.jpeg (679.16 KiB) Viewed 5247 times
- January 3, 1938, Model 11.jpeg (575.06 KiB) Viewed 5247 times
Re: Model 11 Shotgun
Please excuse my comment if it's inappropriate. But... after reading the date on a much older serial I had to inquire. 13,306 were made between serial numbers
I was mistaken on guesstimating this shotgun was a 1935 model... Perhaps the researcher can nail it down to a better date.
I am considering rebluing since there are many of these out there... and mine isn't necessarily a coveted model.
It has a 30" full plain barrel that has a slight ding in one spot. Doesn't appear on the inside. Bore isn't shiny, But serviceable
Am looking for a Vent Rib 28"
I was mistaken on guesstimating this shotgun was a 1935 model... Perhaps the researcher can nail it down to a better date.
I am considering rebluing since there are many of these out there... and mine isn't necessarily a coveted model.
- 20250111_223353.jpg (230.53 KiB) Viewed 3530 times
- 20250111_223636.jpg (230.23 KiB) Viewed 3530 times
Am looking for a Vent Rib 28"
-
Researcher
- Posts: 1121
- Joined: Sat Mar 22, 2003 11:06 pm
- Location: Washington and Alaska
Re: Model 11 Shotgun
That receiver was put in work during May 1938.
An original vent rib barrel is going to be a tough one to find. Remington Model 11/The Sportsman barrels may require fitting.
An original vent rib barrel is going to be a tough one to find. Remington Model 11/The Sportsman barrels may require fitting.
Re: Model 11 Shotgun
Bought one on eBay this morning.
Hopefully this will just slide in.
- Screenshot from 2025-01-19 10-59-51.png (197.16 KiB) Viewed 3496 times
- Screenshot from 2025-01-19 11-03-49.png (352.69 KiB) Viewed 3496 times
- Screenshot from 2025-01-19 11-04-19.png (286.11 KiB) Viewed 3496 times
- Screenshot from 2025-01-19 11-00-55.png (313.23 KiB) Viewed 3496 times
- Screenshot from 2025-01-19 11-04-44.png (352.43 KiB) Viewed 3496 times
Re: Model 11 Shotgun
No fitting required for this one. A 26" Skeet Factory Barrel...
Test firing tomorrow... Looks like a winner.
- 20250125_173039.jpg (140.23 KiB) Viewed 3468 times
- 20250125_173613.jpg (132.69 KiB) Viewed 3468 times
Re: Model 11 VR Barrel
Found this ad from Rem UMC
- Screenshot from 2025-01-26 09-07-05.png (851.12 KiB) Viewed 3448 times