What are you interested in doing?
From memory, to get into the action body first remove the trigger guard by removing the screw(s) on the tang and then rotate the guard counter clock-wise. Next remove the screw located under the break lever and the screws located in the trigger plate. At this point you should be able to separate the action body from the trigger plate and stock.
Good luck!
1894 disassembly
Re: 1894 disassembly
The trigger plate is a tight fit to the action body. A rap or two with a plastic or rubber hammer can be used to free the trigger plate. The stock will be easy to remove once the trigger plate is loose.