Model 10 Assembly / Dissassembly

Post by **DavidFagan** » Sat Jul 25, 2009 9:02 am

This should help.... Nice and big for bad eyes too!

paul harm · Post by **paul harm** » Wed Feb 16, 2011 4:25 pm

I just bought my first Model 10 and thought , oh wow, some help on this thread. But I can't bring anything up when I click on the above info - it's red Xed. Any help ? Would really like to take it apart. Paul

Post by **ForumAdmin** » Wed Feb 16, 2011 5:22 pm

Shouldn't be, do you have images blocked? I can pull them and mail them to you but you really need to fix the browser.

paul harm · Post by **paul harm** » Thu Feb 17, 2011 10:32 am

I'll call my ISP and check - I'm not real computer savey.Paul

Post by **DavidFagan** » Thu Feb 17, 2011 11:20 am

Not you ISP, which browser are you using and I'll tell you where to check.
Internet Explorer? - if so your crazy nuts (biggest virus magnet on the planet)
Mozilla?
Chrome?
Safari?

paul harm · Post by **paul harm** » Fri Feb 18, 2011 10:40 am

Well, I see everything ok- reset my browser. I tried to print it, which it did, but kind of small- only used about 3/4 of the page. I'm learning but a little old for all this new stuff. I've only got "dial-up" - live in the country. Paul

Post by **DavidFagan** » Fri Feb 18, 2011 11:59 am

If you right click the images and then view images it will display JUST the image on the page. If you move you mouse over the picture you will get a magnifying glass with a + in it. That means the image can be viewed larger but it made it smaller to fit you image if you click again it will be HUGE. Between the view image or the large view (after the click) and then a print page it should give you something workable.

paul harm · Post by **paul harm** » Sat Feb 19, 2011 12:25 pm

David, couldn't do as you suggested. But I fooled around and put it in "my pictures" and got it to fill the page. Thanks everyone for the help- now I can take it apart and hope to get it back togeather. Paul

paul harm · Post by **paul harm** » Sat Feb 19, 2011 2:39 pm

I'm having trouble putting the carrier and bolt back in the reciever. Could anyone help? Thanks - Paul

paul harm · Post by **paul harm** » Wed Feb 23, 2011 3:01 pm

After a lot of trying I got it back togeather. The reason I took it apart is that it was very hard to open the last inch or so. I've been told there's probably a burr interfering with the carrier. That, and the release button wants to stick in. Hope to see what's wrong . Paul

paul harm · Post by **paul harm** » Mon Feb 28, 2011 4:05 pm

Anyone know why I can't get the slide to work after it was put back togeather? It seems to be locked up in the closed position. Paul

Remington Society

A Organization Dedicated to the study of Remington Firearms

Model 10 Assembly / Dissassembly

Model 10 Assembly / Dissassembly

Re: Model 10 Assembly / Dissassembly

Re: Model 10 Assembly / Dissassembly

Re: Model 10 Assembly / Dissassembly

Re: Model 10 Assembly / Dissassembly

Re: Model 10 Assembly / Dissassembly

Re: Model 10 Assembly / Dissassembly

Re: Model 10 Assembly / Dissassembly

Re: Model 10 Assembly / Dissassembly

Re: Model 10 Assembly / Dissassembly

Re: Model 10 Assembly / Dissassembly