Hi,
I have family heirloom 1900 manufactured in 1910 that will not fire. After closing and taking it off safe the triggers are just mushy. I was hoping someone here could provide me with the take down procedure and maybe an idea what might be wrong with it? Thanks in advance.
M 1900 sxs take down
Re: M 1900 sxs take down
Hi, Call 330-669-2138 he can help you..
Re: M 1900 sxs take down
Hi. It seems the hammers are not staying cock or the main springs are
broken. There are a number of things that can be the problem it would
be easier telling you on the phone what to check. Jake
broken. There are a number of things that can be the problem it would
be easier telling you on the phone what to check. Jake
-
RJD
Re: M 1900 sxs take down
2shooter,
I got it fixed. It was what I suspected. Someone had taken out that pin and then put it back. The parts that we discussed where lose up inside the receiver and I had to partially take the receiver apart to get them aligned with the pin. Drove the pin back in and re-assembled and it now dry fires. Thanks again.
RJ
I got it fixed. It was what I suspected. Someone had taken out that pin and then put it back. The parts that we discussed where lose up inside the receiver and I had to partially take the receiver apart to get them aligned with the pin. Drove the pin back in and re-assembled and it now dry fires. Thanks again.
RJ