model 11

tschuor77 · Post by **tschuor77** » Sun Sep 06, 2009 11:56 pm

new to forum, need alittle help please, I just purchased a model 11 serial number starting with 143xxx. where could i find how to disassemble the action and clean it. i have a problem when loading a shell from the mag. tube into the chamber the shell gets caught on the left side of the reciever by the piece that is spring loaded and protrudes out the left side also it will not eject the shell every time i was using low brass number 7s, any help will be greatful

tschuor77 · Post by **tschuor77** » Tue Sep 08, 2009 2:46 pm

can anyone help

Researcher · Post by **Researcher** » Tue Sep 08, 2009 4:09 pm

Go to ebay and search on Remington Model 11 and all manner of repro service manuals will display.

Fowlgunner · Post by **Fowlgunner** » Wed Sep 09, 2009 3:29 pm

tschuor77,

Your gun is pushing 100 years old.

Do yourself a favor and have it checked by a competent gunsmith.

Always better safe than sorry.

Fowlgunner

scoobyowner · Post by **scoobyowner** » Wed Sep 16, 2009 7:42 pm

go to browning's web site, you can download the auto 5 manual for free in pdf format. This is virtually the same gun as the model 11. Also, make sure you have the friction pieces set correctly for light loads, if they are set wrong that could cause some problems cycling the action.

Wulfman · Post by **Wulfman** » Wed Sep 16, 2009 9:45 pm

Lots of manuals (including the Model 11) at this site, too.

http://www.stevespages.com/page7b.htm

Den

Beware of scammers.

Always verify the legitimacy of individuals or organizations before sharing personal info or making payments. Do your research. RSA is not responsible for losses or damages caused by scams or fraudulent activity.

model 11

model 11

Re: model 11

Re: model 11

Re: model 11

Re: model 11

Re: model 11