Mohawk Model 48 12 gauge Bolt

Topics related to Post - 1898 Remington Shotguns
Post Reply
KS25-06
Posts: 6
Joined: Sun Sep 08, 2019 10:45 pm

Mohawk Model 48 12 gauge Bolt

Post by KS25-06 »

Serial number 5278196. Have the above gun that was missing the whole bolt assembly. Found one on E****. Seems to be the right bolt, slides back and forth fine. However, when I attached the action links to the back of the bolt, it will not go all the way to the back. Turned them both ways with the same results. These arms are straight until about 1/2" from the end and they come together to fit in the action spring cup. They appear to hang up on the hole in the back of the action. With the bolt assembly removed and using a rod to push on the action cup and spring, it seems to function properly. The bolt has two feet on the front of the slide. If I understand correctly, there were 3 different bolts for the 11-48. I am wondering if I have the correct bolt and arms for this gun. Any help would be greatly appreciated.
Post Reply