xp-100 7mm br
xp-100 7mm br
What is the min and max c.o.a.l. for a xp-100 in 7mm br? Using a sierra 130 grain Mk.
- DavidFagan
- Posts: 368
- Joined: Fri Dec 06, 2002 9:08 pm
- Location: Glen Ellyn, Illinois
- Contact:
Re: xp-100 7mm br
I didn't think there was a "min or max" COAL unless the bullet wasn't at least seated 1/2 way into the neck to make sure it's squarely aligned or wouldn't fit into a magazine.
I believe the best answer is to partially size a case neck, seat, eject, measure (pull with a kinetic hammer) and repeat several times.
Epoxying a bullet in the neck and allowing it to dry is also another option.
I believe the best answer is to partially size a case neck, seat, eject, measure (pull with a kinetic hammer) and repeat several times.
Epoxying a bullet in the neck and allowing it to dry is also another option.
David J. Fagan
The Silicon Sorcerer
The Silicon Sorcerer