Model 700 243 info

Topics related to Post - 1898 Remington Rifles
Post Reply
KenJ
Posts: 5
Joined: Tue Jul 15, 2025 7:15 am

Model 700 243 info

Post by KenJ »

Hello all. I own a model 700 243 that I'm looking to get some info on as to when it was built, twist rate, and any other pertinent info. Thank you in advance, Ken
Attachments
IMG_20260720_073751611.jpg
IMG_20260720_073751611.jpg (2.16 MiB) Viewed 145 times
IMG_20260720_073717341.jpg
IMG_20260720_073717341.jpg (2.14 MiB) Viewed 145 times
IMG_20260720_073910386.jpg
IMG_20260720_073910386.jpg (2.49 MiB) Viewed 145 times
IMG_20260720_073842470.jpg
IMG_20260720_073842470.jpg (1.9 MiB) Viewed 145 times
KenJ
Posts: 5
Joined: Tue Jul 15, 2025 7:15 am

Re: Model 700 243 info

Post by KenJ »

Does anyone have any recommendations as to where to search for this info? I keep coming up with lots of looks but no suggestions. Thank you for your time, Ken
600RemGuy
Posts: 406
Joined: Sat Mar 25, 2006 10:29 pm
Location: Ontario, Canada

Re: Model 700 243 info

Post by 600RemGuy »

July 1966 is your build date. Serial number corroborates this. Are the sights nice and level? The assembler number seems awfully close to the recoil lug, only mabe indicating a rethreaded and set back barrel. I may well be incorrect on that fact.
KenJ
Posts: 5
Joined: Tue Jul 15, 2025 7:15 am

Re: Model 700 243 info

Post by KenJ »

Thank you for the reply. Front sight good and level no rear which may go along with the barrel being reworked. I'm the second owner of this and no history given when purchased. Any thoughts on the twist rate?
600RemGuy
Posts: 406
Joined: Sat Mar 25, 2006 10:29 pm
Location: Ontario, Canada

Re: Model 700 243 info

Post by 600RemGuy »

Sorry-twist rate should be one in 9.25 in the early 700s
KenJ
Posts: 5
Joined: Tue Jul 15, 2025 7:15 am

Re: Model 700 243 info

Post by KenJ »

Thank you again for the reply. Have a good weekend and hope you're not having to deal with the fires in your province. Ken
Post Reply