Pedersen Device.
.30 Pistol 1918.
Barrel Nut needed.
Any idea who might have parts.?
Or any idea who might be able to make a new copy.?
Pedersen Device
-
- Posts: 5
- Joined: Tue Aug 29, 2023 1:32 pm
Pedersen Device
- Attachments
-
- Screen Shot 2022-10-13 at 2.16.54 PM.jpeg (152.12 KiB) Viewed 3061 times
-
- IMG_0925.jpeg (627.93 KiB) Viewed 3061 times
-
- IMG_0925 2.jpeg (133.9 KiB) Viewed 3061 times
-
- Posts: 76
- Joined: Wed Jan 05, 2022 10:05 pm
Re: Pedersen Device
No idea who has parts but a local machine shop should be able to make one fairly easy. Take your picture and the parts so that they can see what the part looks like installed.
Re: Pedersen Device
I agree with Mainspring. Should be easy to fabricate. The only issue I see is determination of nut width.
-
- Posts: 5
- Joined: Tue Aug 29, 2023 1:32 pm
Re: Pedersen Device
Thanks Mainspring & dieNusse1,
Have tried several but there seems to be a problem with difficult threading.?
Understanding above my pay grade...
But will try some more outfits.
Fred
Have tried several but there seems to be a problem with difficult threading.?
Understanding above my pay grade...
But will try some more outfits.
Fred
Re: Pedersen Device
A local machine shop has made screws for me, and the major problem is that the threads of 1863 weren't a standard dia. and pitch. That shouldn't be a problem for the Pedersen device. If that is the problem that you have, there will be a charge for setting up their equipment and programing their computer. In my case (about 10 years ago) this cost was $100. The screws only cost $3 each, but the computer set up was the same no matter how many screws they made. In your case, I'd have at least 2 made, and maybe a few more and offer them for sale to a parts dealer.
Another problem you will have, is that most shops won't take on a job this small. If they will do it, the work will be done pretty much when they have nothing else to do. In my case it was about 7 months.
Good Luck,
Daniel
Another problem you will have, is that most shops won't take on a job this small. If they will do it, the work will be done pretty much when they have nothing else to do. In my case it was about 7 months.
Good Luck,
Daniel
Re: Pedersen Device
Hello,
I do not know if you have found your part or not but I can certainly make it for you provided
Please send me and email to animas7@aol.com RE Pedersen Device and we can discuss it.
Thanks!
I do not know if you have found your part or not but I can certainly make it for you provided
Please send me and email to animas7@aol.com RE Pedersen Device and we can discuss it.
Thanks!