Remington Model 10 Ejector Spring - Install Method

Topics related to Post - 1898 Remington Pistols
Post Reply
mcgill
Posts: 2
Joined: Fri Aug 05, 2022 12:37 pm

Remington Model 10 Ejector Spring - Install Method

Post by mcgill »

Regarding the Remington Model 10 Ejector Spring. I need help figuring out how to install the spring into the top of the receiver.

I've seen 2 slightly different parts advertised as the rem Model 10 Ejector Spring. One sold by jackfirst and one sold by numrich. Both have the same shape and curve; the difference is one with a round hole and the other with a rectangular hole. Not sure if which one is correct, or perhaps either one will work.

What is the correct orientation of the spring? Where does the hole go? Does it curve downward?

How is the spring installed? How is the spring removed? I've seen some blogs mention a rivet, but I don't see where that a rivet would install. Seems like to may just slide into the channel

Any help would be appreciated.
Attachments
Remington Model 10 Ejector Spring v2
Remington Model 10 Ejector Spring v2
Rem10ESv2.jpg (36.64 KiB) Viewed 820 times
Remington Model 10 Ejector Spring v1
Remington Model 10 Ejector Spring v1
Rem10ES.jpg (7.42 KiB) Viewed 820 times
aardq
Posts: 370
Joined: Sun Mar 13, 2005 1:02 pm

Re: Remington Model 10 Ejector Spring - Install Method

Post by aardq »

Hi,

You'll get better results if you post this in the correct section, instead of the post 1898 Handgun section.

Daniel
Post Reply