I have a 308 caliber 742 remington. I used to use it to hunt in front of dogs here in Louisiana. Mostly pulled and pressed a soft point in military ammo. Stopped hunting in front of dogs back in 1974. Ran out of military ammo. Would like to start using rifle again for hogs. I have a lot of military primed brass and some reminton nickled brass primed. The powder I want to use is IMR 4895. What is a good load with remington 150 gr. core lock with this powder. I want a load that will funtion but not over power the action.
HELP!!! 45LC
Reloading for the 742 woodmaster
Re: Reloading for the 742 woodmaster
.
If you don't have a reloading manual (which you should), there's lots of information online from a number of sources.
Just do a Google search on "308 Winchester reloading data" and you'll find plenty of reading.
http://www.imrpowder.com/
http://www.hodgdon.com/
http://www.handloads.com/loaddata/defau ... er&Source=
http://www.6mmbr.citymaker.com/f/Sierra308Win.pdf
Den
If you don't have a reloading manual (which you should), there's lots of information online from a number of sources.
Just do a Google search on "308 Winchester reloading data" and you'll find plenty of reading.
http://www.imrpowder.com/
http://www.hodgdon.com/
http://www.handloads.com/loaddata/defau ... er&Source=
http://www.6mmbr.citymaker.com/f/Sierra308Win.pdf
Den
Re: Reloading for the 742 woodmaster
I have lots of load data in books but no info on auto remington rifles. I was justy nasking if any one on the site ever reloaded for this type of rifle and had good results. I want to get a load tyhat will function the action and will work from there. Thanks but I already have at least 6 reloading manuals on hand and none have spacifific loads I need!!!
45LC
45LC