Model 31 Help

Topics related to Post - 1898 Remington Shotguns
Post Reply
mrtools4u
Posts: 1
Joined: Sat Mar 06, 2021 11:24 am

Model 31 Help

Post by mrtools4u »

Hello, I have a Remington model 31 and decided that I would give it a good cleaning, so I removed the trigger section and as I was removing the ejection rods the mechanical housing went to slide off my lap (barrel and stock are removed) and as I grabbed it I ended up pulling the slide all the way back, now the guide is down and in jammed position. any ideas on how I can fix this issue? I can't even put the gun back together at this point.
Thanks again for any help.

Marty
4065tom
Posts: 11
Joined: Tue Mar 16, 2021 10:13 am

Re: Model 31 Help

Post by 4065tom »

Hopefully by now you have solved this problem. If not, reach in the ejection port and depress the ejector back against the receiver wall. Then push down on the shell lifter, while holding the ejector back.
Post Reply