Can someone explain the different magazine options 700 AAC

Topics related to Post - 1898 Remington Rifles
Post Reply
Matth3w
Posts: 1
Joined: Wed Sep 02, 2015 5:12 pm

Can someone explain the different magazine options 700 AAC

Post by Matth3w » Wed Sep 02, 2015 5:18 pm

I just bought a 700 AAC with the threaded barrel. I purposely bought it with a junk stock with the intent to eventually upgrade the stock. However, I am not as familiar with bolt-action rifles as I am with ARs and pistols. Right now I have the latch dump or whatever it's called.

I see bottom blind, latch, detachable magazine, etc. I googled the answer and didn't get quite the answers I thought I would get in terms of full explanation. The detach mag is common sense, the latch you just dump the casings out at the end of a 4+1 mag, and then is the bottom blind essentially a fixed magazine perm attached to the bottom of the well that collects brass?

I don't quite understand fully.

As an example, one stock says:

"The Choate® Sniper and Varmint ADL stocks will work with Remington® Model 700™ ADL and BDL firearms. The ADL uses a blind magazine well, the BDL uses a hinged floorplate. The BDL will work with the Choate® ADL stocks, but once installed it will have a blind bottom magazine. Modification by a gunsmith is necessary to allow the use of a hinged floorplate with Choate® Sniper and Varmint stocks."

Understood I have the BDL version on the new 700 .308 AAC. But can someone translate the above for me? This isn't the stock I'm actually looking to buy, granted, it just illustrates my confusion the best.

I see a Bell and Carlson that has the ability to have the detach mag. I see a Magpul one which appears to also have a detach mag.

Dave
Posts: 87
Joined: Thu Dec 01, 2005 7:40 am
Location: Vermont

Re: Can someone explain the different magazine options 700 A

Post by Dave » Thu Sep 17, 2015 10:42 pm

Hi Matt,
If you look at an ADL from the bottom, what you will see is a trigger guard that only covers the trigger. There is no hinged floor plate or removable magazine, just stock wood in front of the trigger guard. This is called a blind magazine and can only be emptied by cycling the action. On a BDL you will see the trigger guard and a HINGED floor plate that you unlatch to dump out the cartridges from the bottom and the HINGED floor plate swivels and stays with the gun. The hinged floor plate is a great feature for hunters so they don't have to rack the bolt for each round to empty the gun after the hunt. Much safer.

The Choate stock has a blind magazine like the ADL with no hole for the hinged floor plate. If you want to use the hinged floor plate of the BDL you have to hog out the bottom of the Choate stock so the BDL floor plate fits. The stock is made to be a blind magazine thus no cutout for the floor plate. It's not as easy as it sounds as the floor plate must be fitted fairly precisely. Thus the notation to use a gunsmith. I'm not sure but I think you can use the magazine box from the BDL and you would have a blind magazine just like the ADL. But worst case, you might have to buy an ADL magazine box if your trying to put a BDL in a Choate stock and don't want to hog out the stock for the BDL floor plate.

The DETACHABLE magazine is a different setup entirely. It has a REMOVABLE magazine that you can remove and put in your pocket with the loaded rounds still in it. It allows you to carry extra magazines just like an auto pistol. Any stock that says it fits an ADL (box magazine) will have to be modified (read hogged out) for a BDL floor plate or a detachable magazine to fit. I expect the stocks that say they will fit a detachable magazine or a hinged floor plate are hogged out already and wouldn't fit a box magazine ADL. You would have to buy the BDL detachable magazine retrofit kit that would include the plate that isn't hinged and has the hole and latch if you wanted a detachable magazine. Unless of course you already have a 700 with a detachable magazine. Then you would already have the magazine and proper hardware.
Hope this clears this up for you,
Dave

Post Reply

Who is online

Users browsing this forum: model63 and 1 guest