new guy with rolling block questions

Topics related to Pre - 1898 Remington Rifles
Post Reply
Bill Allen
Posts: 22
Joined: Wed Dec 15, 2021 6:30 pm

new guy with rolling block questions

Post by Bill Allen »

My little mystery is solved turns out after casting and talking to anybody that would put up with me my two rolling blocks are spanish reformado. Brass chambers perfectly and the casting is the same dimension wise as the brass. Next question can I use the same bullet as in the 43 spanish as well since all it was just a a jacked round same barrel? Thanks for the guys that helped answer my beginners questions. Works out decently since my third rolling block is a 43 spanish. Thanks again Bill
ndnchf
Posts: 39
Joined: Mon Sep 30, 2013 5:57 pm

Re: new guy with rolling block questions

Post by ndnchf »

If the bore/ groove diameter and twist is about the same, give it a try. They shoud work.
Bill Allen
Posts: 22
Joined: Wed Dec 15, 2021 6:30 pm

Re: new guy with rolling block questions

Post by Bill Allen »

Supposedly the only change was reaming it and using a jacketed bullet and of course different brass but the barrel was untouched. So logically (a word that gets me in trouble sometimes) it should shoot the cast bullet just fine
Post Reply