Search found 203 matches

by 2shooter
Thu Aug 15, 2019 9:20 pm
Forum: RS / Pre - 1899
Topic: FE Trap restoration
Replies: 13
Views: 1409

Re: FE Trap restoration

Mike many years back I have a F Trap that had a Silvers pad on it. I got hold of the same recoil pad but it did not have the spur I very carefully took the liner off and the spur liner off the old pad and glued the new pad just like when it came from Remington. That original liner has Silvers name o...
by 2shooter
Fri May 24, 2019 9:02 pm
Forum: RS / Pre - 1899
Topic: Pigeon Gun ? or Trap Gun ?
Replies: 24
Views: 1401

Re: Pigeon Gun ? or Trap Gun ?

Remington 1894 F grade trap guns have safety button. The Pigeon Gun does not have a safety the safety slot is filled in at the factory when gun was made.I cannot tell from pictures what grade your gun is if it has a safety it could be a F Trap. They were marked on side barrels F Trap. Your Gun could...
by 2shooter
Wed Apr 17, 2019 8:45 pm
Forum: Post-Remington Production
Topic: Remington knives made in the USA
Replies: 1
Views: 754

Re: Remington knives made in the USA

Paul The Bullet Knife was made by Bear Cutlery thru 2017 was there last year. Buck took over for 2018 I bought some at Remington plant store in Ilion. The box reads lifetime warranty.Remington Cutlery warrants that it will repair or at there option replace knife if found to contain any defects. I ha...
by 2shooter
Tue Apr 02, 2019 7:14 pm
Forum: WTB / Pre - 1899
Topic: Model 1894 sear spring early type with pin forged with hammer
Replies: 1
Views: 751

Re: Model 1894 sear spring early type with pin forged with hammer

I just seen you wanted parts for 1894 did you find them?
by 2shooter
Thu Jan 03, 2019 7:39 pm
Forum: RS / Pre - 1899
Topic: Heavy Duck Guns
Replies: 4
Views: 1020

Re: Heavy Duck Guns

I have a 1889 10ga. 30inch barrels 2 5/16 firing pins center 9 1/2 lbs. serial 85684 ..I didn't measure the bolsters...Its back in the safe. I also have a 1894 ten I would have to dig it out.
by 2shooter
Sun Nov 25, 2018 9:56 pm
Forum: RS / Pre - 1899
Topic: 1894 FE Grade
Replies: 14
Views: 1999

Re: 1894 FE Grade

You said in your post The Pigeon Gun Lives It is not a live Pigeon Gun it is, a F Trap. The 1902 Remington catalog list Pigeon Gun it is for live Pigeon shooting it has no safety and Ordnance steel barrels guaranteed for Nitro Powders. Your F Trap is nice I do not like the recoil pad its not origina...
by 2shooter
Wed Aug 22, 2018 8:18 pm
Forum: RR / Post - 1898
Topic: Remington 12C foregrip screws
Replies: 4
Views: 988

Re: Remington 12C foregrip screws

You got my attention about the forend screws I took one out of my 12b it mikes Head dia. .261 then there is a shoulder .196 then thread Dia. .176.. I have a 10x 48 adjustable die if I tighten it down I can cut .176 thread. I can make that screw I have a lathe I can turn it to spec. and thread it. I ...
by 2shooter
Sun Aug 19, 2018 12:10 pm
Forum: RS / Pre - 1899
Topic: Barrel length for 1894 10-Gauge
Replies: 4
Views: 895

Re: Barrel length for 1894 10-Gauge

I still would ask what is the choke and the pellet count stamp on the lug does it match the choke. I have a 1894 grade A 30" barrels
choke dia. right .747 pellet count 326
choke dia. left .745 pellet count 356
by 2shooter
Sat Aug 18, 2018 8:29 pm
Forum: RS / Pre - 1899
Topic: Barrel length for 1894 10-Gauge
Replies: 4
Views: 895

Re: Barrel length for 1894 10-Gauge

I would ask what the chokes and the pellet count, does it match, also what is the bore diameter. My guess the barrels have been cut look at the end do the barrel touch and is the triangle between the barrels steel or solder.
by 2shooter
Tue Jun 05, 2018 8:24 pm
Forum: RS / Pre - 1899
Topic: Chamber length on Model 1889 10-gauge ?
Replies: 9
Views: 1928

Re: Chamber length on Model 1889 10-gauge ?

My Model 1889 10ga. grade one is 2 7/8 chamber that is standard unless its been ream.
by 2shooter
Thu May 03, 2018 7:59 pm
Forum: RS / Pre - 1899
Topic: Chamber length on Model 1885 10-gauge
Replies: 4
Views: 982

Re: Chamber length on Model 1885 10-gauge

I have checked three 1882 an two 1883 ten Ga. guns all have 2 5/8 chambers. also have checked five 1878 duck guns they all have 2 7/8 chambers I would think they would have keep that as the standard chamber for ten Ga. but they didn't.
by 2shooter
Fri Feb 23, 2018 7:20 pm
Forum: RS / Post - 1898
Topic: 26" Barrel on Model 1900?
Replies: 8
Views: 1215

Re: 26" Barrel on Model 1900?

This 1900 from what I can put together was sent back to Remington factory after 1911 restock and 26 inch set of barrels add to gun all serial numbers match.
by 2shooter
Thu Feb 22, 2018 8:40 pm
Forum: RS / Post - 1898
Topic: 26" Barrel on Model 1900?
Replies: 8
Views: 1215

Re: 26" Barrel on Model 1900?

Be careful of 26 inch barrels most have been cut check the pellet count stamp on them and the chokes. I have a 1900 that has 30 and 26 inch two barrel set the serial number is 315359 the pellet count for 26 in. right 201 left 289. Both set of barrels are serial number to the gun.
by 2shooter
Thu Feb 08, 2018 5:07 pm
Forum: RS / Post - 1898
Topic: 1900 top spring replacement
Replies: 2
Views: 793

Re: 1900 top spring replacement

Bob I have the top lever spring made to fit and print with instruction how to put it in place. 330-669-2138 Jake
by 2shooter
Sun Jan 28, 2018 12:45 pm
Forum: RS / Pre - 1899
Topic: looking for info on my 1894
Replies: 11
Views: 2282

Re: looking for info on my 1894

I would not refinish the wood or metal the marks give it character that happen to it when your father or grandfather was hunting with it. Just carefully clean, wipe it down.