Page 1 of 1
Remington 591M Bolt needed 5mm
Posted: Fri Oct 17, 2008 11:42 am
by 591m
If you have a bolt for the 591m 5mm for sale. Let me know about it.
yarmerdd@hotmail.com
Re: Remington 591M Bolt needed 5mm
Posted: Fri Oct 17, 2008 1:14 pm
by remington600
What is the problem with the original? You really need to watch headspacing on the 5mm. If the headspacing is a hair to much it will blow out the side of your bolt and break your extractor and possibly cause more damage.
Re: Remington 591M Bolt needed 5mm
Posted: Sat Oct 18, 2008 1:09 pm
by 591m
Hey, thanks for the info. I bought the gun in 1975,6 from a friend. He said it never had more than 50 rounds threw it. But it was broke at the time. If its built like the clip is, it could have several issues. I don't know? I noticed a small peace of metal missing on the back end of the bolt assembly. So, I need to start with a new bolt. The gun as a whole is excellent and I am looking forward to some shooting since the renewed 5mm shells are finally here, and a bolt?