Another ID

Topics related to Pre - 1898 Remington Rifles
Post Reply
Hooknline
Posts: 3
Joined: Mon Apr 01, 2019 11:01 am

Another ID

Post by Hooknline »

My wife recently inherited this, and I cant id it. The only marks are a “pa” on the action side. No other marks that I can see. It almost looks like a no 7
Attachments
DD5B6134-29CB-40D7-8E2C-FB4247A80AF8.jpeg
DD5B6134-29CB-40D7-8E2C-FB4247A80AF8.jpeg (2.12 MiB) Viewed 4461 times
89755F20-CE5B-459D-962D-F9F20EDCAA41.jpeg
89755F20-CE5B-459D-962D-F9F20EDCAA41.jpeg (2.23 MiB) Viewed 4461 times
788AEEDD-F03C-460F-B45B-1D1D811D7E66.jpeg
788AEEDD-F03C-460F-B45B-1D1D811D7E66.jpeg (1.7 MiB) Viewed 4461 times
marlinman93
Posts: 379
Joined: Sat Aug 14, 2004 10:47 pm

Re: Another ID

Post by marlinman93 »

The barreled action is indeed a #7, although it's been buffed out and hot blued. Stocks are not original Remington, and the checkering and ivory inlays are not Remington.
Originally the barrel was rust blued, and the receiver was color casehardened. And the stocks would be a plainer checkering pattern.
Hooknline
Posts: 3
Joined: Mon Apr 01, 2019 11:01 am

Re: Another ID

Post by Hooknline »

Thank you for the insight. Overall, how bad do the modifications hurt the value do you think?
stanforth
Posts: 173
Joined: Sat Aug 29, 2009 5:56 am
Location: Oxford England

Re: Another ID

Post by stanforth »

I personally like the modifications and think that they make the rifle desirable but in a different way.
marlinman93
Posts: 379
Joined: Sat Aug 14, 2004 10:47 pm

Re: Another ID

Post by marlinman93 »

I don't mind the modifications either, but they certainly hurt the value considerably. Mostly the hot blued finish, as the stocks are kind of neat. But the ivory inlays, and longer than normal forearm hurt the eye appeal of what is actually a nice looking buttstock and checkering job.
In my opinion the decreased value of such modifications is the cost of making the gun correct again, or close to it. The buttstock could be left alone, or replace the ivory with wood inserts. The forearm could be replaced, shortened, or reworked to look closer to original. Cost on that could vary from not much for an owner, to well over $1,000 if you paid someone to make original style stocks.
The color case work, and rust bluing could easily end up around $750-$1000 if it's just handed over to a gunsmith to do all polishing, and finish work.
But a #7 is an extremely rare and desirable gun! So even with the present modifications I think it's still worth probably $2,000-$2500 as is, if the bore is in nice condition. Maybe $500 less if the bore is poor.
Hooknline
Posts: 3
Joined: Mon Apr 01, 2019 11:01 am

Re: Another ID

Post by Hooknline »

Thanks for the in depth info. This was left to my wife by her dad who just passed, so I doubt any work will be done to it to correct it. For now, its part of her memory of him. At least we know what it is now.
marlinman93
Posts: 379
Joined: Sat Aug 14, 2004 10:47 pm

Re: Another ID

Post by marlinman93 »

That's good to hear an heirloom will be kept and appreciated! I'd keep it too, but I'm biased since I love Remington single shot sporting rifles!
admin
Site Admin
Posts: 678
Joined: Tue Dec 03, 2002 2:14 pm

Re: Another ID

Post by admin »

Gosh I hate to open my mouth just so someone can tell me I'm wrong. (but that's ok)
But that's not a #7, to me it looks like someone did a real good job on maybe a NY Military.
It's missing a screw, the breach and hammer are not right.
marlinman93
Posts: 379
Joined: Sat Aug 14, 2004 10:47 pm

Re: Another ID

Post by marlinman93 »

admin wrote: Sat Apr 06, 2019 4:42 am Gosh I hate to open my mouth just so someone can tell me I'm wrong. (but that's ok)
But that's not a #7, to me it looks like someone did a real good job on maybe a NY Military.
It's missing a screw, the breach and hammer are not right.
I think you're right! Missing two screws. One on the receiver, and one on the breech block. Plus I totally missed the extra plate with two screws on the side of the action. Appears it's a pistol converted into a #7 rifle clone.
Post Reply