Remington side by side 12 gauge

Topics related to Pre - 1898 Remington Shotguns
Post Reply
jmorrow
Posts: 1
Joined: Thu Dec 09, 2010 7:52 am

Remington side by side 12 gauge

Post by jmorrow »

I have recently acquired a remington side by side shotgun from my deceased grandfather. It has 2 triggers and the following number on the trigger guard "P136697". Additionally, Under the forearmn the following digets are stamped "36697". I recall he telling me that it was the first hammerless double barrel that Remington made. I would love to find some history on the gun. I would greatly apprecitate any guidance.

Thank you.

John
Researcher
Posts: 1080
Joined: Sat Mar 22, 2003 11:06 pm
Location: Washington and Alaska

Re: Remington side by side 12 gauge

Post by Researcher »

Remington Hammerless Doubles -- Two patents were issued on the same day, October 30, 1894. No. 528,507 pertaining to the milling of the frame was granted to R. C. Fay of Ilion, New York, assignor to the Remington Arms Company of same place; and No. 528,508 pertaining to the automatic ejectors, to R.C. Fay and G.E. Humphreys of Ilion, New York, assignor to the Remington Arms Company of same place.

If the gun is absolutely plain with no engraving, just "Remington Arms Co." stamped on the side of the frame it is an A-grade if a Model 1894. Model 1894 serial numbers were in the 100,000 range and often preceded by a P a Remington stock letter. Also perfectly plain was the lower priced Model 1900 with serial numbers in the 300,000 range, and often a stock letter of Q. These were also known as the K-grade. P136697 would be a 1907 vintage gun.

A Model 1894 B-grade had just a bit of borderline engraving. As the grades went up C-, D-, and E-grade the engraving became more extensive, the stock wood and checkering finer, and the overall workmanship better. There is normally a grade letter stamped on the left side watertable, or on "bridge-frame guns" (usually 103,500 and lower serial numbers) on the bridge. Also, if you remove the trigger guard, the grade letter is often stamped in the wood after the serial number.

If a Remington Model 1894 is fitted with automatic ejectors the the written grade designation has a letter E added to it and if it has Remington Steel barrels an R or Ordnance Steel Barrels an O -- AE-grade (A-grade with ejectors and the regular Damascus barrels), AER-grade (A-grade with ejectors and Remington Steel barrels), BO-grade (B-grade with Ordnance Steel barrels) or CEO-grade (C-grade with ejectors and Ordnance Steel barrels). I’ve never seen these extra letters stamped on the gun’s watertable. In the Model 1900s things are reversed. Remington must have considered their Remington Steel barrels standard and appended a D if the gun was equipped with 2-blade Damascus barrels -- KD-grade or KED-grade. "Ordnance Steel" is normally stamped on the top of the barrels on AO-/AEO- and BO-/BEO-Grade Remington doubles and engraved on higher grades.

You need to check out Charles G. Semmer's book "Remington Double Shotguns." It is available from the author 7885 Cyd Drive, Denver, CO 80221, for $60 plus $5 shipping and handling. It is invaluable if you are going to shoot, invest, collect or play in the Remington double gun field. Remington supplied a number of different pattern Damascus barrels on these old doubles. A picture of their salesman’s sample of the various styles of Damascus available is shown on page 275 of Semmer's book.

Remington Arms Co. stamped the actual pellet counts of their test patterns on the rear barrel lug of their Model 1889 hammer doubles and their Model 1894 and 1900 hammerless doubles. If the number is three digits, that is the count, if the number is two digits a leading 3 is implied. From surviving hang-tags we know the standard load they used to target 12-gauge guns was 1 1/4 ounces of #8 going 511 pellets to the load. My 12-gauge KE-Grade Model 1900 is stamped 33 on the left and 24 on the right. That would be 333/511 = 65% left and 324/511 = 64% right, or about improved modified in both barrels. The chokes measure .027" in both barrels of that gun.

By the end of the first decade of the 20th Century, Remington saw that the future laid with their John M. Browning designed Remington Autoloading Gun (later known as the Model 11) and their John D. Pederson designed Remington Repeating Shotgun (later known as the Model 10). So, they concluded a deal with Norvell-Shapleigh Hardware Co. of StLouis, for their entire inventory of break-action shotguns in inventory and in process, on February 3, 1910. There must have been a lot of guns involved, because the records show 3206 Model 1894s, and 16435 Model 1900s shipped in 1910. The 1909 Remington Arms Co. catalogue was the last one to include the doubles, and there was a version of the 1909 catalogue that only had the Remington Autoloading Shotgun, the Remington Repeating Shotgun, and the Autoloading Repeating Rifle.
2shooter
Posts: 228
Joined: Sat Jun 02, 2007 5:42 pm
Location: ohio

Re: Remington side by side 12 gauge

Post by 2shooter »

John, The list I have shows your gun was made first part 1907.
woollybugger
Posts: 19
Joined: Fri Nov 12, 2010 7:15 pm

Re: Remington side by side 12 gauge

Post by woollybugger »

post some pics of it, we would love to see what you ended up with. maybe even look on the barrel flats and see what grade it is.
Post Reply