Remington 51 380 and or 32 parts machine shop prints

Topics related to Post - 1898 Remington Pistols
Post Reply
Steven Swope
Posts: 111
Joined: Wed Dec 23, 2015 6:15 pm
Location: USA

Remington 51 380 and or 32 parts machine shop prints

Post by Steven Swope »

Hi Ya All :

Looking around on the www... found these... figured I post them..

Never seen these before .. maybe of use to someone..

A page of Rem 51 parts with machinests( sp ) measurements and
drawings.

Mostly internal stuff.,and some of the springs needed

Page may have to be translated .. got it off the www

http://handbookhardfind.narod.ru/handbo ... 1054;#1053;_

About 1/2 down page REM 15 thru REM 20,,, if needed have the parts made by others or you make them your self if you have the necessary machines or access to them...... maybe useful in the future..
you never know.
admin
Site Admin
Posts: 678
Joined: Tue Dec 03, 2002 2:14 pm

Re: Remington 51 380 and or 32 parts machine shop prints

Post by admin »

Steven Swope wrote:Hi Ya All :

Looking around on the http://www... found these... figured I post them..

Never seen these before .. maybe of use to someone..

A page of Rem 51 parts with machinests( sp ) measurements and
drawings.

Mostly internal stuff.,and some of the springs needed

Page may have to be translated .. got it off the www

http://handbookhardfind.narod.ru/handbo ... 1054;#1053;_

About 1/2 down page REM 15 thru REM 20,,, if needed have the parts made by others or you make them your self if you have the necessary machines or access to them...... maybe useful in the future..
you never know.
The one language I can't read, ug.... corrected url

http://handbookhardfind.narod.ru/handbo ... ith_03.htm

[url]http://handbook_hard_find.narod.ru/handbook_raspozn_03.htm[/url] is dead...
tiger_toney
Posts: 2
Joined: Sun Feb 05, 2017 9:36 am

Re: Remington 51 380 and or 32 parts machine shop prints

Post by tiger_toney »

Page will not open. Please post again or send to tward54@bellsouth.net
admin
Site Admin
Posts: 678
Joined: Tue Dec 03, 2002 2:14 pm

Re: Remington 51 380 and or 32 parts machine shop prints

Post by admin »

I found a copy from August 10, 2008 but it's worthless anyhow because it's links are messed up for example the remington is
file:///C:/arhiv/%D0%B0%D1%80%D1%85%D0%B8%D0%B2%20%D1%81%D0%B0%D0%B9%D1%82%D0%B0/%D0%BB%D0%B8%D1%82%D0%B5%D1%80%D0%B0%D1%82%D1%83%D1%80%D0%B0/Handbook/REMINGTON.zip

I seem to remember this and why I didn't pursue grabbing that a long time ago.
Post Reply