After removing the pin that goes through the frame (like you would on a 1911). What is the next step for taking the Model 51 apart?
Thanks.
ZK
Remington Model 51
With the gun in your right hand, the hammer cocked and the grip safety depressed push the slide back so you can get a good hold on the barrel with your lift hand thum and forfinger. Now pull the barrel. The barrel, slide and breach block will come off the front of the gun as a unit.
A very good right up on the Remington Model 51 can be had in the 1979 edition of Gun Digest. This is the 33 edition.
BigBlockk
Later.....
A very good right up on the Remington Model 51 can be had in the 1979 edition of Gun Digest. This is the 33 edition.
BigBlockk
Later.....
-
- Posts: 111
- Joined: Wed Dec 23, 2015 6:15 pm
- Location: USA
Re: Remington Model 51
Merry X - Mas !!
The You tube site has a good video showing the tricks to get this apart .. if you haven't got it broken down yet..
The You tube site has a good video showing the tricks to get this apart .. if you haven't got it broken down yet..
Re: Remington Model 51
The 51 is a PITA to take apart if there is a video watch it or your be on the ground looking for a spring.Steven Swope wrote:Merry X - Mas !!
The You tube site has a good video showing the tricks to get this apart .. if you haven't got it broken down yet..