Remington Society

Thanks a lot Hoof. Will Contact him. Mike

Where did you see this 20/28 conversion. I saw one in SC a while back and fell in love with it. It had been professionally reblued and the wood had been refinished. It turned out beautiful. If it is reasonable I might try and purchase it.

While you are at it you should clean the action spring tube in the stock and replace the spring. The spring is not very expensive. I use a wire brush in the tube and a light coat of light grease inside. BC

You might give Laib's Gunsmithing a call. They are 3200 specialists, but have been a great help finding parts for my 1100s. Give them a call at 320/796-2686. Both Pat laib and Tom Fox are truly nice people. BC

You might give Laib's Gunsmithing a call. They are 3200 specialists, but have been a great help finding parts for my 1100s. Give them a call at 320/796-2686. Both Pat laib and Tom Fox are truly nice people. BC

What guage, style ect. BC

Sorry I didn't get back sooner on this topic. I talked to the people at Laibs. He suggested using a 16ga instead of a 12ga. I laid a 16ga and the broken 20ga side by side and one hammer stroke later I was back in business. thanks for the help. BC

I bought these guns last year. The were unfired when I got them. They are matched set #464. L071362H on the 410 andl046014J on the 28. Gold wash and ajustable weights on the magazine tube. Love to shoot both of these guns, but have a lot of trouble in 4 gun competition because of the difference in w...

I have a Matched Set of 1100s in 28 and 410. The number is 4xx. Would these be in the first year of production. Thanks, Basketcase

Sounds like the link was put back upside down. The curve goes up. You will need to disassemble the gun and check it. hope this helps.

Thanks, My gunsmith/machinist friend said he believed the same thing. I keep 12ga feed latches on hand. I shoot skeet competively in both 12 and 20ga. Always carry a spare and a tool box.
Thanks for all the valuable info you give so freely.

Does anyone know of a source for a feed latch for a model 1100, 20ga standard. I have several guns, but I want to exhaust all the resourses before making a parts gun out of one of them.