Search found 9 matches

by frenchie
Thu Jan 11, 2007 1:03 pm
Forum: RR / Pre -1899
Topic: unknown remington rolling block
Replies: 1
Views: 3122

unknown remington rolling block

Hello again,another rolling block question I have an old remington rolling block I need to find some information about,It is a 32 rimfire octagon barrel non takedown,I thought it might be a model 99,but it has a curved reciever where the stock fits,have looked at a lot of pictures of the 99 but none...
by frenchie
Tue Dec 12, 2006 3:56 pm
Forum: RR / Pre -1899
Topic: rolling block butt plate
Replies: 2
Views: 2785

rolling block butt plate

Hello out there, I have a old #1 blackpowder rolling block,had to replace the buttstock,can't seem to locate a butt plate for it,I have two plates,but they are too large in the tang area and have too much curve in the curved area. Any help out there.
Thanks
by frenchie
Mon Apr 24, 2006 6:26 pm
Forum: RR / Pre -1899
Topic: rolling block parts
Replies: 2
Views: 3038

rolling block parts

Hello out there, Have been trying for several weeks to locate some parts for my #1 black powder roller no luck (ebay has them,but someone will pay twice what they are worth) I need either a "C" type extractor for a swedish roller or a original breech block with the rotary extractor. The sw...
by frenchie
Thu Apr 20, 2006 7:22 pm
Forum: RR / Pre -1899
Topic: Need stock #4 Rolling Block .32
Replies: 2
Views: 2653

#4 stock

Hello
There is one on ebay,and some parts.
by frenchie
Tue Apr 11, 2006 3:42 pm
Forum: RR / Pre -1899
Topic: extractor
Replies: 2
Views: 2944

extractor

I have a #1 Remington rolling block I want to make into a 32/40, it has a Swedish block in it with the rotary extractor,where to I get an extractor that I can install, will need to put an extra hole for it, or would it be better to use the bar type an modify my breech block.
by frenchie
Fri Apr 07, 2006 7:24 pm
Forum: RR / Pre -1899
Topic: Rolling block barreled action ????
Replies: 1
Views: 2478

Hello
Are the hammer and block pins held in with screws or a little strap that holds them both at once? It might be a Swedish rolling block if screws hold the pins in. It most likely has had a 45/70 barrel that has not been chambered.
by frenchie
Sat Jan 21, 2006 9:52 pm
Forum: RP / Pre - 1899
Topic: No 2 rolling block with firing pin retractor
Replies: 1
Views: 2272

firing pin retractor

I have a Swedish made rolling block with a retractor,never saw one on a US made one.
by frenchie
Fri Jan 20, 2006 12:05 pm
Forum: RP / Pre - 1899
Topic: remington rolling block barrel
Replies: 1
Views: 2991

remington rolling block barrel

I have 3 rolling block barrels,none of them will fit my action,they are too big about .030 too large,my action is 1.312 thick,how do I tell what size I have,can read no marking on the tang,it is a center fire. the barrels I have are a 7x57 and two shotgun barrels. Help!!! :roll:
by frenchie
Tue Jan 17, 2006 8:11 pm
Forum: Guestbook
Topic: rolling blocks
Replies: 0
Views: 1861

rolling blocks

Can anyone give me the dimensions of rolling blocks so I can tell what I have, I have several that are of diffenent sizes. I need a barrel but dont know what size action I have. :?: